Welcome to my blog. Let what you see stimulate your imagination and inspire your own creations.
Showing posts with label steel wool. Show all posts
Showing posts with label steel wool. Show all posts

Sunday, July 31, 2011

Ever hear of bronze wool?

I thought the only "wool" around was steel wool, but there are other metals and combinations that are out there. One is even specially formulated to pack small spaces to keep mice out!

Someone suggested that bronze wool might be worth looking into, so I did some research, bought some pads, and am waiting for an opportunity to use it. Although it does not come finer than a "fine" grade, it should be good for smoothing intermediate coats. The advantage, apparently is that it does not shred or rust, like steel wool. It's especially recommended for marine use, which makes sense.

I also found out that there is some oil in most regular steel wool, that is added to prevent rusting. One manufacturer specializes in "oil free" steel wool, since oily residues can interfere with some finishes. I had been storing steel wool pads with assorted bits of sandpaper, and wondered where the oily looking patches were coming from. Never occurred to me that the steel wool might be the culprit.

I may just give the oil free stuff a try, since it, too, is not supposed to shred. If you've ever tried to tack off those little steel fibers, you know that it's not fun. Finishing is enough of a chore as it is. Anything that makes it better and easier is certainly worth a shot!


Wednesday, July 6, 2011

Triumph over Waterlox


Refusing to give up, I gave the bowl a final coat of Waterlox. This time, I wiped the bowl down thoroughly with mineral spirits until no specks at all were visible, strained the Waterlox to get rid of any steel wool particles I had inadvertently introduced, and used a disposable foam brush. I worked on the inside first, going over the sections until no dry spots were visible, and mopping up excess liquid from around the circumference of the base.

Then, I elevated the bowl on a small piece of wood, and worked on the outside. I left it overnight at the community shop, which is air conditioned, and picked it up the next morning. In a few weeks, when the finish has fully cured, I will give it a final rubdown.

I'm pleased with the way it came out, but the first time using any new product is always a bit hair-raising.